Bestway 58516E Flowclear 800 GPH Pump for Above Ground Pools Sand Filter Pump

  
The Bestway® 800 gal FlowcearT Sand Filter is a highly efficient and environmentally friendly way to keep clean water flowing through your above ground pool. It's also far more cost effective than running a traditional filter pump system as the pump uses silica sand instead of a filter cartridge. Where a filter cartridge may need replaced every 2 weeks, silica sand only needs to be changed once every 3 years.

The pool pump works by draining pool water through a hose and into the filtration system. Although water passes through the system with fantastic ease, the silica sand is so compact that it traps dirt and debris.

Filtered water is then pumped down a separate hose and into the swimming pool inlet. Separating debris from sand, when the pressure gauge indicates that the corrosion proof tank is full, is a simple case of turning it to its backwash setting. Once it has been separated, a waste hose is attached and the rinse valve is turned, flushing filth and debris to a suitable deposit area. The Sand Filter is compatible with 300-4,800 gal. (1,100-18,100 L) pools.

It makes an excellent upgrade to a traditional filter pump and is a fantastic way to enhance your above ground pool. Pump flow rate of 800 gal. Compatible with pools sizes 300-4,800 gal. Top flange clamp allows 360° rotation for quick and smooth installation. ChemConnectT dispenser evenly disperses the stable level of chlorine needed for proper chemical balance.

Pre-filter strainer catches larger particles to protect the pump impeller and ensure a longer life span. Require sand size: #20 silica sand, 0.45-0.85 mm, approximately 8.5 kg. Also works with Bestway® PolysphereT Pool Filtration Spheres. Contents: 1 sand filter set, 1 ChemConnect dispenser.